How To Resolve The Supply Memory Error In Hp Printers
Last updated
Last updated
When you attempt to print or scan something on an HP printer, an error message labelled "Hp " appears. This issue frequently arises when the toner cartridge's metal contacts or chip fails to securely connect to the corresponding connections inside the printer. The error message "Supply Memory Error" is shown when the printer is unable to identify the inserted toner cartridge. For someone who needs some prints right quickly, this annoying situation can be too much to bear. As a result, dialling the HP Support Number right away is strongly advised because top IT experts are on duty there every single day. You may get more specific information here. Take a brief look at this webpage, then!
There are a number of potential causes for the issue, some of which are given below:
A missing package, a paper jam, or trouble removing the protective strips are the causes of this error.
This problem can also arise if the toner cartridge is not connected to the printer's pressed metal contacts.
The toner could not be in the correct location because to fractured plastic components.
due to the usage of out-of-date printer software or firmware
If you utilise a brand-new toner cartridge as opposed to an empty one, this issue can possibly manifest.
Try the following fixation to get your printer running again:
Solution 1: Misplaced package or protective strips.
New toner cartridges may be installed using plastic clips and an orange protection strip. This guards against damage to the cartridge during transportation. All of the plastic clips and the shielding strips across the drum must be taken off the printer before beginning to install a new toner. If not, you might not be able to print from these documents using your HP Printer. Clips are noticed since it is so simple to utilise them for advertising. On the toner-side protection strip, remove the orange ring that encircles it. After doing this, there won't be any issues shown on the printer screen panel whether you print, scan, or fax any document.
Solution 2: Compressed metal connectors
Two tiny metal contacts must be connected to the appropriate contacts on the toner cartridge in order for the device to recognise a toner cartridge that has been fitted. Even if the contacts aren't making contact, the metal still interacts with the printer and the contacts on the toner that have made a circuit. Your printer will then detect the toner shortage. Look inside the toner cartridge after removing it from the printer to see if you can spot anything that resembles a microchip or two metal squares. After that, have a look at the connections that match the locations in the printer where they would attach. Carefully pull the two metal connections apart if they appear to be pressed together at the back to avoid damaging anything. After the toner has been loaded, this will let them to properly connect to it. Make sure there are no paper jams before installing a new toner since it is also possible that misplacing packaging components or paper jams might cause a problem.
Method 3: Broken Plastic Pieces
The plastic slots might become damaged if one of the sides damages the toner cartridge. If this occurs, it's possible that the toner won't go in the actual toner slots on the printer. Similar to the former cause of the HP 10.1000 Supply Memory Error, the contacts likewise won't connect properly. The toner cartridge must be changed for a new one in order to properly address this problem.
Solution 4: outdated firmware and software
The manufacturer of HP printers often releases new versions of the printer's firmware or software. Therefore, you can encounter an HP 10.1000 Supply Memory Error if the printer software gets obsolete. All you need to do is use Google to solve this issue. You can find the most recent firmware for your PC or printer by typing "[your printer model] firmware." When the software or firmware is appropriately upgraded, the supply memory problem is often resolved. The HP website has the most recent firmware upgrades. The insertion of a compatible or remanufactured toner cartridge with outdated data stored in the cartridge's microcontroller may be the final cause of the supply memory issue. The error message The firmware of the printer can then show a Supply Memory Error. The reman from the company has to be changed in order to fix this issue. After that, replace it in your printer.
Hopefully! The aforementioned solutions have helped to cure the HP 10.1000 Supply Memory Error. But if anyone is still encountering issues, please get in touch with HP Customer Service right now for a one-stop solution. The IT team is very informed and experienced. As a consequence, your problem will be resolved right away!
References: